The website platform advocates equal and friendly behavior and aims to establish a respectful, caring and harmonious online community.

January 1, 2024 Jilin Yite Hose Co., Ltd. did not produce hazardous waste and did not transfer hazardous waste.

January 1, 2021 Jilin Yite Hose Co., Ltd. did not produce hazardous waste and did not transfer hazardous waste.

Unit Name: Information Disclosure on Hazardous Waste Prevention in Operation Area of Jilin Yite Rubber Hose Co., Ltd. in 2022

prevention and control of solid waste generated by the contractor shall be made public.

Hose sheath is mainly used in a variety of engineering machinery and mining hydraulic equipment and wear-resistant requirements of wire and cable protection. Because it can completely cover the protected product, forming an effective wear and anti-ultraviolet protection, it plays a protective role in many rod-shaped objects.

The high-pressure hose structure has one layer of steel wire braided hose, two layers of steel wire braided hose, three layers of steel wire braided hose, four layers of steel wire wound hose, six layers of steel wire wound hose, general diameter hose diameter 6-102, large diameter hose diameter 102-300. There are high-pressure hose and low-pressure hose. Low-pressure hose has more sizes than high-pressure hose. Several types of high-pressure hose are also easy to remember. Professional focus on creating high quality high pressure tubing, with long service life, small bending radius, high pressure, fatigue resistance and other properties. High pressure hose ozone resistance, high and low pressure resistance, temperature resistance (-80 to 300 degrees), high transparency, strong resilience, resistance to compression permanent deformation, oil resistance, stamping resistance, acid and alkali resistance, wear resistance, flame resistance, voltage resistance, conductivity and other properties. The hydraulic hose mainly relies on the reinforcement layer to bear the pressure. Braided rubber hose is glued firmly to the inner and outer rubber layers by the glue slurry. Due to the mutual contact between the steel wires in the same braided layer, the durability of the steel wires will be affected by the friction between the steel wires due to their different expansion and contraction when subjected to dynamic pressure. The winding pipe is formed by two layers with different winding directions to form a working layer, and there is an intermediate glue between the two layers, so there is no intersection between the two layers of steel wires of the same working layer. Therefore, it will not form stress concentration or friction and wear when subjected to dynamic pressure with the cross bending between the steel wires. Therefore, it has good durability and can withstand high pressure.

Hose (hose) assembly is a commonly used auxiliary device in hydraulic system. It is made of high-pressure steel wire braided or wound hose and steel joints buckled by special equipment. It is used to connect various hydraulic components in the hydraulic system. It is mainly used for hydraulic power transmission or delivery of high-pressure media such as water, gas, oil, etc. under the condition of working temperature of -40 ℃ to 100 ℃ to ensure the circulation of liquid and the transmission of liquid energy.