The difference between high pressure steel wire braided hose and low pressure hose

Release time:

2020-11-19

The high-pressure hose structure has one layer of steel wire braided hose, two layers of steel wire braided hose, three layers of steel wire braided hose, four layers of steel wire wound hose, six layers of steel wire wound hose, general diameter hose diameter 6-102, large diameter hose diameter 102-300. There are high-pressure hose and low-pressure hose. Low-pressure hose has more sizes than high-pressure hose. Several types of high-pressure hose are also easy to remember. Professional focus on creating high quality high pressure tubing, with long service life, small bending radius, high pressure, fatigue resistance and other properties. High pressure hose ozone resistance, high and low pressure resistance, temperature resistance (-80 to 300 degrees), high transparency, strong resilience, resistance to compression permanent deformation, oil resistance, stamping resistance, acid and alkali resistance, wear resistance, flame resistance, voltage resistance, conductivity and other properties. The hydraulic hose mainly relies on the reinforcement layer to bear the pressure. Braided rubber hose is glued firmly to the inner and outer rubber layers by the glue slurry. Due to the mutual contact between the steel wires in the same braided layer, the durability of the steel wires will be affected by the friction between the steel wires due to their different expansion and contraction when subjected to dynamic pressure. The winding pipe is formed by two layers with different winding directions to form a working layer, and there is an intermediate glue between the two layers, so there is no intersection between the two layers of steel wires of the same working layer. Therefore, it will not form stress concentration or friction and wear when subjected to dynamic pressure with the cross bending between the steel wires. Therefore, it has good durability and can withstand high pressure.

Key words: